Validation of an expert system for inventory replenishment using case studies
The design of vertical formwork is dependent on the lateral pressure predicted to act on the form face; due to the pressure envelope it is difficult to establish a comparison between different methods using only statistical parameters. Therefore, this article has two main ...
| Autores: | , |
|---|---|
| Tipo de documento: | artigo |
| Estado: | Versão publicada |
| Data de publicação: | 2011 |
| País: | Uruguay |
| Recursos: | Universidad de Montevideo |
| Repositório: | REDUM |
| Idioma: | espanhol |
| OAI Identifier: | oai:redum.um.edu.uy:20.500.12806/2461 |
| Acesso em linha: | http://revistas.um.edu.uy/index.php/ingenieria/article/view/285 https://hdl.handle.net/20.500.12806/2461 |
| Access Level: | Acceso aberto |
| Palavra-chave: | Encofrado Hormigón Presión lateral Validación experimental Formwork Concrete lateral pressure Experimental validation |
| Resumo: | The design of vertical formwork is dependent on the lateral pressure predicted to act on the form face; due to the pressure envelope it is difficult to establish a comparison between different methods using only statistical parameters. Therefore, this article has two main objectives, firstly intent to explain why ratios of measured pressure to calculated pressure (E/T) can be accepted to validate a model, and secondly intent to quantify the maximum ratio E/T that can be accepted in the validation. |
|---|