Robust Nonsingular Terminal Sliding Mode Control of a Buck Converter Feeding a Constant Power Load
In recent years, DC microgrid systems feeding constant power loads (CPLs) have been given a particular focus due to their effect on the overall system stability caused by their electrical characteristics behaving as negative incremental impedance. To address this issue, this paper investigates the s...
| Autores: | , , |
|---|---|
| Tipo de documento: | artigo |
| Estado: | Versão publicada |
| Data de publicação: | 2023 |
| País: | España |
| Recursos: | Universidad de Jaén |
| Repositório: | RUJA. Repositorio Institucional de la Producción Científica de la Universidad de Jaén |
| OAI Identifier: | oai:ruja.ujaen.es:10953/3363 |
| Acesso em linha: | https://doi.org/10.3390/electronics12030728 https://hdl.handle.net/10953/3363 |
| Access Level: | Acceso aberto |
| Palavra-chave: | DC microgrid systems Constant power load DC-DC converter Nonsingular terminal Sliding mode controller Terminal sliding mode controller Incremental negative impedance (INI) |
| Resumo: | In recent years, DC microgrid systems feeding constant power loads (CPLs) have been given a particular focus due to their effect on the overall system stability caused by their electrical characteristics behaving as negative incremental impedance. To address this issue, this paper investigates the stabilization of a DC bus voltage in a DC microgrid (MG) feeding a CPL. The output voltage of the main DC bus is stabilized by using a robust nonsingular terminal sliding mode controller that is characterized by the elimination of the singularity problem that arises from the conventional terminal sliding mode controller. The CPL is emulated by a boost converter where its output voltage is tightly regulated. The system is investigated in terms of voltage following and disturbance rejection. The robustness and effectiveness of the proposed control strategy are assessed against input voltage fluctuations and power demand variations. The proposed controller is validated through simulations and an experimental setup. |
|---|