Energy analysis of a novel Rotary Wheel Recuperator with embedded Phase Change Material
This paper numerically analyses the energy savings capacity of a novel Rotary Wheel Recuperator (RWR) system with Phase Change Material (PCM) embedded into the metallic structure of the system. As a novelty, several cases with different wall materials are analysed. PCM helps increase the storage cap...
| Autores: | , , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2026 |
| País: | España |
| Recursos: | Universidad de Castilla-La Mancha |
| Repositorio: | RUIdeRA. Repositorio Institucional de la UCLM |
| OAI Identifier: | oai:dnet:ruidera_____::3c661922f812ddd2467a37ec7223f695 |
| Acesso em linha: | https://doi.org/10.1016/j.est.2026.121862 https://www.sciencedirect.com/science/article/pii/S2352152X26015264?via%3Dihub https://hdl.handle.net/10578/48187 |
| Access Level: | acceso abierto |
| Palavra-chave: | Energy efficiency Energy recuperator Heat exchanger PCM Rotary Wheel Recuperator |
| Resumo: | This paper numerically analyses the energy savings capacity of a novel Rotary Wheel Recuperator (RWR) system with Phase Change Material (PCM) embedded into the metallic structure of the system. As a novelty, several cases with different wall materials are analysed. PCM helps increase the storage capacity and extends the time that the system is working. The study covers different PCM content (up to 20%) and different thicknesses of the metallic structure (between 0.25 mm and 1.30 mm). The study concludes than an optimum combination of a PCM content of 15% in mass and a wall thickness of thopt = 0.75 mm, would permit the additively manufacturing of the proposed system and a proper operation without an excessive air pressure drop and a high charging efficiency. With these parameters and a Coefficient of Performance (COP) of 1, the extra energy consumed by the fan is less than 1.2% of the energy saved by the RWR. |
|---|