A Methodology to Define the Niyama Criterion Reinforced with the Solid Fraction Analysis: Application to Sand Casting of Steel Bars
Niyama and solid fraction criteria are used to predict the solidification porosity and microporosity in computing simulation of casting processes. The solid fraction permits us to determine the areas that solidify last and that are a candidate for presenting porosity if a feeding system is not corre...
| Autores: | , |
|---|---|
| Tipo de documento: | artigo |
| Data de publicação: | 2023 |
| País: | España |
| Recursos: | Universidad Camilo José Cela (UCJC) |
| Repositório: | RUIdeRA. Repositorio Institucional de la UCLM |
| OAI Identifier: | oai:ruidera.uclm.es:10578/44535 |
| Acesso em linha: | https://doi.org/10.3390/met13101777 https://hdl.handle.net/10578/44535 |
| Access Level: | Acceso aberto |
| Palavra-chave: | FEM casting simulation Niyama criterion Sand casting Solid fraction |
| Resumo: | Niyama and solid fraction criteria are used to predict the solidification porosity and microporosity in computing simulation of casting processes. The solid fraction permits us to determine the areas that solidify last and that are a candidate for presenting porosity if a feeding system is not correctly designed. The Niyama criterion is locally obtained based on the thermal and cooling gradients at a point of the liquid casting. The Niyama value at a casting point varies rapidly from low rates to high ones during the last part of the metal solidification, which demands that the percentage of solidification of the metal is defined to determine the Niyama number. In addition, the Niyama threshold that establishes the soundness of the workpiece can vary according to the nature of the metal or the casting system. In this paper, a methodology to determine the solidification percentage is presented. The method is based on the Niyama number evolution during the solidification process at different key points. These points are validated by the solid fraction criterion as healthy or, on the contrary, as candidates for containing porosity. In addition, some considerations of the solid fraction criterion are visited since the threshold value for which the isolation of the last solidification areas can be defined is not clear. The research is validated by the empirical casting criteria existing in the literature for obtaining sound parts and applied to low-carbon steel bars produced by sand casting. |
|---|