Studies on the electrochemical disinfection of water containing escherichia coli using a dimensionally stable anode
The aim of this work was to investigate the disinfectant effect of electrolysis on chlorine-free water, artificially contaminated with Escherichia coli (CCT-1457) and to evaluate the bactericidal activity of electrolysis and kinetic behavior of a single-cell reactor, with a DSA (Dimensionally Stable...
| Authors: | , , |
|---|---|
| Format: | article |
| Status: | Published version |
| Publication Date: | 2010 |
| Country: | Brasil |
| Institution: | Universidade Estadual Paulista (UNESP) |
| Repository: | Repositório Institucional da UNESP |
| Language: | English |
| OAI Identifier: | oai:repositorio.unesp.br:11449/226133 |
| Online Access: | http://dx.doi.org/10.1590/S1516-89132010000500030 http://hdl.handle.net/11449/226133 |
| Access Level: | Open access |
| Keyword: | Bactericidal effect DSA oxide electrode E. coli inactivation Electrochemical treatment Electrolysis of microorganisms Electroxidation process |
| Summary: | The aim of this work was to investigate the disinfectant effect of electrolysis on chlorine-free water, artificially contaminated with Escherichia coli (CCT-1457) and to evaluate the bactericidal activity of electrolysis and kinetic behavior of a single-cell reactor, with a DSA (Dimensionally Stable Anode) electrode to develop a scaled-up system. A high-density E. coli suspension (106 CFU mL-1) was electrolyzed in this reactor at 25, 50 and 75 mA cm-2 for up to 60 min, at flow rates of 200 and 500 L h-1. Bacterial survival fell by 98.9% without addition of chlorinated compounds and a power consumption rate not more than 5.60 kWh m-2 at flow rate of 200 L h-1 and 75 mA cm-2. The process produced a germicidal effect that reached this inactivation rate within a relatively short contact time. Also, a solution of electrolyzed 0.08 M Na2SO4 added to the inoculum showed residual bactericidal effect. The efficiency of disinfection was regulated by both the contact time and current density applied, and a kinetic function for the survival rate was developed for the purpose of scaling up. |
|---|